ООО "Технокерамика" совместно с ООО "Технопарк" оказывает комплексную поддержку по внедрению и вводу в эксплуатацию технологии литья по выплавляемым моделям (ЛВМ).
Для подробностей свяжитесь с нашим менеджером
Get a personal offer
Ultracast WAX-model wax of the Russian production on the basis of synthetic polymers and natural waxes. It is used in the manufacture of models of castings by the method of precise casting.
Model waxes Ultracast® WAX, in contrast to the standard Russian models used in metallurgy, have a number of advantages, such as good filling of molds and their clear reproduction, high fluidity, lack of interaction with mold materials and refractory coatings, low adhesion to the surface molds, tool and worker's hands, good wetting with refractory slurry, high strength characteristics, good elasticity, small and stable shrinkage, low thermal expansion, regeneration possible and restoration of spent waxes, minimum ash content. Also one of the main advantages of Ultracast® WAX model wax is a high rate of solidification, which significantly affects the productivity increase when models are inhibited. The company "Technopark" developed and serially made three modifications Ultracast® WAX:
Group | Mark | Application area | Filler content % | Drop temperature of drop °С | Ash content % | Penetration at 25°C *0,1мм | Linear shrinkage % | Viscosity at 100°C MPa.s |
Unfilled wax | J 1040 | jewelry, art casting | — | 66-75 | max 0,05 | 2-4 | 1,1-1,3 | 50-150 |
J 1050 | ювелирный, художественное литье | — | 70-75 | max 0,05 | 2-5 | 1,1-1,3 | 50-150 | |
J 1060 | jewelry, art casting | — | 75-80 | max 0,05 | 2-5 | 1,1-1,3 | 20-150 | |
J 1210 | Submersible wax for infiltration of polystyrene models | — | 65-70 | max 0,05 | 2-4 | 1,2-1,4 | 40-100 | |
L 1 | small parts, foundry systems | — | 70-78 | max 0,05 | 2-4 | 0,8-1 | 120-180 | |
L 2 | small parts, foundry systems | — | 65-75 | max 0,05 | 3-5 | 0,8-1,1 | 70-120 | |
L 3 | middle parts, foundry systems | — | 75-80 | max 0,05 | 3-5 | 0,7-0,9 | 100-150 | |
Filled with wax | S 1102 | Shaped small parts | 20% | 76-80 | max 0,05 | 3-6 | 0,6-0,75 | 200-500 |
S 1103 | Shaped middle parts | 30% | 78-85 | max 0,05 | 3-6 | 0,6-0,7 | 300-600 | |
S 1104 | Large shaped parts | 35% | 75-80 | max 0,05 | 3-6 | 0,55-0,7 | 350-600 | |
S 1201 | Blades of gas turbine engines, large parts | 35% | 74-82 | max 0,05 | 4-7 | 0,55-0,7 | 300-600 | |
S 1202 | Blades of gas turbine engines, small parts | 20% | 70-75 | max 0,05 | 4-7 | 0,65-0,8 | 150-400 | |
S 1203 | Blades of gas turbine engines, middle parts | 30% | 76-83 | max 0,05 | 4-7 | 0,6-0,75 | 150-400 | |
S 1204 | Blades of gas turbine engines, middle parts | 30% | 76-83 | max 0,05 | 4-7 | 0,6-0,75 | 300-600 | |
Glue wax | K 1010 | Gluing parts to the gating system | — | 85-90 | max 0,05 | 5-10 | 1-1,5 | 100-250 |
К 1020 | Gluing parts to the gating system | — | 79-85 | max 0,05 | 5-10 | 1-1,5 | 400-700 | |
Wax for repair | R 1110 | Repair of models | — | 65-70 | max 0,05 | — | 0,9-1,2 | 50-100 |
For all questions you can contact us or ask our partners http://ultracast.ru
Request a call
xPlease fill in all the fields.
The request was not sent, an error occurred.
Thank you for your application, we will contact you soon!
No question sent, an error occurred.
Thank you for your question, we will contact you soon!
Ask a question
x